Complete Remote Control of LAUMAS Multichannel Transmitters

Laumas Elettronica SRL (Italy) – Press Release: Now the multichannel transmitters TLB4, TLM8 and CLM8 can be managed completely remotely, via fieldbus.

Configure parameters and manage procedures and programs: everything that up to now could only be set from the instrument keyboard can now be controlled directly from a PLC and PC.

Less constraints, more convenience.

The ability to remotely access the weight transmitter means more freedom in its installation.

The PLC graphical interface dedicated to the instrument can be complete with all the information and will make it easier for the operator to control it.

What can be controlled from a PLC or PC?

The remote control of the transmitter is complete.

You can set all the parameters…

• Theoretical calibration parameters;
• Diagnostic settings;
• Filter;
• Zero parameters;
• Configuration of inputs and outputs.

… manage procedures…

• Calibration with sample weight:
• Equalization;
• Diagnostics, with the new function of overload control on a single channel for weight reading.

…and control programs.

New: the LOAD batching program:

The new LOAD batching program is available for TLB4 and TLM8.

With its operating parameters of batching constants and formula programming, it allows multichannel transmitters to manage and control batching applications.

Webinar & Demo Live:

Watch our free webinar "Complete Control from PLC of Laumas Multichannel Transmitters", to learn more and see how to apply the new features.